Acer AT310 F1 User Manual - Page 71
Installing an expansion card, I/O interface
View all Acer AT310 F1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
53 Installing an expansion card I/O interface The AT310 F1 has five PCI bus slots with four separate bus segments, namely: • PCI1 - PCI Express® x8 slot (x8 bandwidth) • PCI2 - PCI Express® x4 slot (x1 bandwidth) • PCI3 - PCI Express® x16 slot (x8 bandwidth) • PCI4 - PCI Express® x8 slot (x4 bandwidth) • PCI5 - PCI slot (32-bit/33 MHz, 3.3 V) Note: PCI1 will be disabled and signal is switched to PCI3 slot when a x16 PCI device is plugged in the PCI3 slot. To install an expansion card: 1 Perform the pre-installation instructions described on page 28. 2 Remove the side panel described on page 36. 3 Lay the server on its side (components showing). 4 If necessary, remove any cables that prevent access to the PCI slot. 5 Locate an empty expansion slot that is compatible with the specification of the card you intend to install.