Acer AT350 F2 Acer AT350 F2 Server Service Guide - Page 44

30 3 System upgrades Configuring the hard disk drive The AT350 F2 accommodates up to eight 3.5-inch or sixteen 2.5-inch hotplug SATA/SAS hard disk drives. By default, the system is shipped with only one hard disk drive bay. To install additional hard disk drives in the second hard disk drive bay, you need to purchase the optional bay and SAS RAID controller. Note: Maximum HDD support is SKU-dependent. Accessing the drive bays Since SATA/SAS drives have hot-plug capability, you do not need to access the inside of the chassis or power down the system to install or replace SATA/SAS drives. Access the HDD bay door as follows: 1 Unlock the drive bay door (1). 2 Open the HDD bay door as shown (2).