Acer Altos 1100 Acer Altos 1100 User's Guide - Page 73
PCI IRQ Setting, You can assign IRQ3, IRQ4, IRQ10
View all Acer Altos 1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
PnP/PCI System Configuration PCI IRQ Sharing No] VGA Palette Snoop Disabled] Graphics Aperture Size 64 ] MB Plug and Play OS No] Reset Resource Assignments ..... [No] Page 2/2 ↑↓ = Move Highlight Bar, → ← = Change Setting, F1 = Help PCI IRQ Setting This parameter allows for Auto or Manual configuration of PCI devices. If you use plug-and-play (PnP) devices, set this parameter to Auto. The system then automatically assigns IRQs to PnP devices. If your PCI device is not a PnP, you can manually assign the interrupt for each device. Refer to your PCI card manual for more information. The default setting is Auto. When the PCI IRQ Setting is set to Auto, all the IRQ setting fields become gray and nonconfigurable. PCI Slots These parameters allow you to specify the appropriate interrupt for each of the PCI devices. You can assign IRQ3, IRQ4, IRQ5, IRQ7, IRQ9, IRQ10, IRQ11, IRQ12, IRQ14, or IRQ15 to the slots. Chapter 2 - BIOS Utility 2-31