Acer Altos 1100 Acer Altos 1100 User's Guide - Page 87
Power-on Password, Bypassing the Setup Password, Operation Mode
![]() |
View all Acer Altos 1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Bypassing the Setup Password If you forget your setup password, you can bypass the password security feature by hardware. Follow these steps to bypass the password: 1. Turn off and unplug the system. 2. Open the system housing and set JP7 to 2-3 to bypass the password function. 3. Turn on the system and enter the BIOS utility. This time, the system does not require you to type in a password. You can either change the existing Setup password or remove it by selecting None. Refer to the previous section for the procedure. 2.8.3 Power-on Password The Power-on Password secures your system against unauthorized use. Once you set this password, you have to type it whenever you boot the system. To set this password, enter the BIOS utility, select System Security, then highlight the Power-on Password parameter. Follow the same procedure as in setting the Setup password. Make sure to set JP7 to pins 1-2 to enable the Power-on Password. Operation Mode This function lets you enable or disable the password prompt display. When set to Normal, the password prompt appears before system boot. When set to Keyboard Lock, the password prompt does not appear; however, your system Chapter 2 - BIOS Utility 2-45
![](/manual_guide/products/acer-computers-altos-1100-acer-altos-1100-users-guide-c82bb95/87.png)