Acer Altos R360 F3 Installation & Configuration Guide - Page 26

Altos R360 F3 Installation Configuration Guide mode if the OS media supports EFI. NOTE. Please load the RAID driver during OS installation. NOTE. You need an external USB floppy drive or USB Flash drive to load RAID driver during the OS installation. NOTE. Please copy Intel Integrated RAID Module driver from Resource Kit DVD to a USB floppy drive or USB flash drive. NOTE. For OS installation, a USB optical drive is required as well. 1. Please boot the system from the Windows Server 2012 DVD. Follow the instructions to do the installation. 2. When "Where do you want to install Windows" message displayed, please Insert the USB flash which includes the RAID driver and click on "Load Driver". 3. Browse to the folder that includes the Integrated Hardware RAID driver and click OK. 4. It will show the available driver. Please select "megasas2.inf" as target driver. 5. After the RAID driver is loaded, please click Drive options to partition the drive or click Next to use default disk partition. 6. Follow the normal procedure to finish the installation n. Chipset Driver Package Installation 1. Please insert the Resource Kit DVD into the optical drive 2. Select model and click on Drivers. 3. Find the Chipset Driver by expanding the directory in the following order, Altos R360 F3 -> Onboard Chipset 4. Select WS2012/WS2012 R2 then click on Browse. 5. Double-click on Setup.exe and follow the instructions to complete the driver installation. 6. After the installation is completed, reboot the system. Gigabit Ethernet Driver Installation 1. Please insert the Resource Kit DVD into the optical drive 2. Select model and click on Drivers. 3. Find the Gigabit Ethernet Driver by expanding the directory in the following order, Altos R360 F3 -> Onboard Network. 4. Select WS2012/WS2012 R2 then click on Browse. 5. Double-click on Windows_x64_Install.bat. 19