Acer Altos R360 F3 Installation & Configuration Guide - Page 33

Altos R360 F3 Installation Configuration Guide 1. Please boot the system from the Red Hat Enterprise Linux 6 Update 5. 2. At Welcome Menu, please press ESC. 3. Type below command and press Enter. linux dd 4. Follow the instruction to select the Driver Disk Source to load the driver for Intel Integrated RAID Module. 5. Follow the instruction and select Intel Integrated RAID Module as the install target device for the installation. 6. Please Select Software Development Workstation. 7. Please follow the general procedure to complete the installation. Gigabit Ethernet Driver Installation NOTE. The onboard Gigabit Ethernet driver is included in Resource Kit DVD. Please check path of the RAID utility in Windows OS environment first and copy the driver from the Resource Kit DVD to HDD (e.g. /tmp directory) 1. Stop network service # service network stop 2. Remove the OS built-in NIC driver # rmmod ixgbe 3. Change the directory to the driver source and install the driver # cd /tmp # tar zxvf ixgbe-.tar.gz # cd ixgbe-/src/ # make install # modprobe ixgbe 4. Start the network service to bring up both of the network interfaces. # service network start 5. Use the network configuration utility like system-config-network in command line or select System -> Preferences-> Network Connections in GUI to configure the network interfaces. VGA Driver Installation Red Hat Enterprise Linux 6 Update 5 has the built-in driver for onboard VGA. You don't need to install the VGA 26