Acer Altos R910 User Guide for Altos R910 - Page 64
Installing a hot-plug memory board, Installing DIMMs on and Removing DIMMs
View all Acer Altos R910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
54 3 System upgrade 6 Install a memory board or memory board air baffle. For instructions on how to install a memory board, refer to section below. For instructions to install a memory board air baffle, refer to "Installing a memory board air baffle" on page 43. 7 Observe the post-installation instructions described on page 34. Installing a hot-plug memory board 1 Observe the ESD precautions described on page 33. 2 Locate an empty memory board slot. 3 If necessary, remove the memory board air baffle. Perform instructions described in "Removing a memory board air baffle" on page 42. 4 Add or replace memory DIMMs as needed. For instructions, see "Installing DIMMs" on page 73 and "Removing DIMMs" on page 75. 5 Ensure the handle on the memory board is in the open position. 6 Align the board edges with the card guides and slide the memory board into the memory board slot (A). 7 Push the handle down until it is in the locked position (B). 8 Observe the post-installation instructions described on page 34.