Acer Aspire T136 Aspire T136 Service Guide - Page 33

Standard CMOS Features Select Standard CMOS Features from the main menu to configure some basic parameters in your system. The following screen shows the Standard CMOS Features menu: CMOS Setup Utility- Copyright (C) 1985-2006, American Megatrends, Inc. Standard CMOS Features System Time System Date 01:57:20 Wed 12/28/2005 Help Item Use [ENTER], [TAB] XPrimary IDE Master [Not Detected] or [SHIFT-TAB] to XPrimary IDE Slave [Not Detected] select a field XSecondary IDE Master CD/DVD ROM XSecondary IDE Slave CD/DVD ROM Use [+] or [-] to XS-ATA 1 Hard Disk configure system Date XS-ATA 2 Hard Disk Floppy A 1.44 MB 31/2" Total Memory Size Size : 1024MB KLIJ :Move Enter: Select +/-/ :Value F10:Save ESC:Exit F1:General Help F7:Optimized Defaults The following table describes the parameters found in this menu. Settings in boldface are the default and suggested settings. Date Parameter Time Primary/Secondary IDE Master/ Slave/ S-ATA1/S-ATA2 Drive A Description Options Lets you set the date following the weekdaymonth-day-year format Weekday: Sun, Mon...Sat Month: Jan., Feb...Dec. Day: 1 to 31 Year: 1999 to 2098 Lets you set the time following the hour-minutesecond format Hour: 0 to 23 Minute: 0 to 59 Second: 0 to 59 Leave this item at Auto to enable the system to automatically detect and configure IDE devices on the channel. If it fails to find a device, change the value to Manual and then manually configure the drive by entering the characteristics of the drive in the items described below. IDE Device Model Number: Not Detected These items display the status of auto detection of S-ATA Devices when "Onboard SATA-IDE" sets to "IDE" Not Detected Hard Disk Allows you to configure your floppy drive A. None 360 KB, 5.25-inch 1.2 MB, 5.25-inch 720 KB, 3.5-inch 1.44M, 3.5 - inch 2.88 MB, 3.5-inch Chapter 2 27