Acer Aspire T136 Aspire T136 Service Guide - Page 38

Integrated Peripherals CMOS Setup Utility- Copyright (C) 1985-2006, American Megatrends, Inc. Integrated Peripherals OnBoard Floopy Controller Serial Port1 Address Enabled 3F8/IRQ4 Help Item Serial Port2 Address 2F8/IRQ3 Parallel Port Mode ECP ECP Mode DMA Channel DMA3 Parallel Port IRQ IRQ7 Audio Device Enabled Modem Device AUTO Onboard Lan Device Enabled Onboard LAN Boot Rom Disabled Onboard USB Controller Enabled USB Keyboard/Mouse Support Enabled KLIJ :Move Enter: Select +/-/ :Value ESC:Exit F1:General Help F6:Load Optimized Defaults F7:Load Fail-Safe Defaults Parameter OnBoard Floppy Controller Serial Port1/2 Address Parallel Port Address Parallel Port Mode ECP Mode DMA Channel Parallel Port IRQ Audio Device Modem Device Onboard Lan Device Onboard Lan Boot ROM Description Option Use this item to enable or disable the onboard floppy disk drive interface. Enabled Disabled Use this item to enable or disable the onboard COM1serial port, and to assign a port address. 3F8/IRQ4 2E8/IRQ3 3E8/IRQ4 This item enable or disable the onboard 378 LPT1 parallel port, and assigns a port 278 address, The Auto setting will detect and 3BC available address. Use this item to set the paralll port mode . Normal ECP EPP ECP+EPP When the onboard parallel port is set to ECP mode, the parallel port can use DMA3, DMA0, or DMA1 DMA0 DMA1 DMA3 Use this item to assign IRQ to the parallel port IRQ5/IRQ7 This item enables or disabled the onboard Disabled AC'97 audio chip Enabled Use this item to enable or disable the modem device Disabled Enabled Enables and disables the onboard LAN device Disabled Enabled Use this item to enable or disable the booting from the onboard LAN or a network add-in card with a remote boot ROM installed. Disabled Enabled 32 Chapter 2