Acer Aspire ZS600 Acer Aspire ZS600 Desktop Service Guide - Page 17

Power Supply Electrical Design Feature 0 135W/180W in stable mode (Acer Assign System Power Unit) EPS 2.0 (The maximum no-load power consumption for EPS 2.0 is 0.5W or less for adapters with an output power of 50W to 250W) Input:100~240V~2.4A 50~60HZ Output:19V 7.1A (135W); 19V 9.5A (180W) Security Feature 0 Lock pad Thermal Feature 0 Support Intel 65W TDP CPU plus 55W VGA and full configuration should pass thermal criteria. Adequate venting in the rear of chassis Must Follow Thermal engineering requirement v2.2 RFW in Appendix. EMI Considerations 0 Metal shielding for MB (includes VGA card), touch panel control board. Apply aluminum foil between heatsink and VESA mount. The outside jacket of converter cable, LVDS cable, DVI cable and webcam cable are applying conductive tape, and they fixed on basepan by conductive tape. The ground tab which on RJ45 has to contact with MB shielding. Gasket on MB shielding button side for increase contact area between USB connector and MB shielding. Acoustic Criteria 0 Operating mode: 35 dBA or under (under Windows OS) Idle mode: 28 dBA or under (under Windows OS), please refer to Acer test summary for details Must Follow DT ATX acoustic Engineering RFW V1.2 in Appendix Shock & Vibration Test Criteria 0 Operating  frequency 5 ~ 350 Hz  Acceleration 0.26 G  Sweep Rate 0.5 Octave/Minute  Endurance Cycle 1 Cycle (2 sweeps)  Test Axis: All possible operating orientation.  Test Time: 23 minutes Vibration Unpackaged test (Random) Hardware Specifications and Configurations 1-9