Acer CB240HYK User Manual

Acer CB240HYK Manual

Acer CB240HYK manual content summary:

  • Acer CB240HYK | User Manual - Page 1
    Acer LCD Monitor User's Guide
  • Acer CB240HYK | User Manual - Page 2
    . All Rights Reserved. Acer LCD Monitor User's Guide Original Issue: 01/2015 Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary
  • Acer CB240HYK | User Manual - Page 3
    The following are normal with the LCD monitor and do not indicate a problem. • Due to the nature of the all warnings and instructions marked on the product. Cleaning your monitor Please carefully follow these guidelines when cleaning the monitor: • Always unplug the monitor before cleaning. •
  • Acer CB240HYK | User Manual - Page 4
    from the electrical outlet. Safe listening To protect your hearing, follow these instructions. • Gradually increase the volume until you can hear it clearly and comfortably damage internal devices. "For displays with glossy bezels the user should consider the placement of the display as the bezel
  • Acer CB240HYK | User Manual - Page 5
    type SPT-2, rated 7 A 125 V minimum, VDE approved or its equivalent, 4.5 meters (15 feet) maximum length. Product servicing Do not attempt to service this product change in performance, indicating a need for service • the product does not operate normally after following the operating instructions v
  • Acer CB240HYK | User Manual - Page 6
    and obey all signs and instructions. Potentially explosive atmospheres include areas . Switch off the device near gas pumps at service stations. Observe restrictions on the use of radio equipment burden placed on the environment. We at Acer are very conscious of the environmental effects of
  • Acer CB240HYK | User Manual - Page 7
    instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit http://www.acer
  • Acer CB240HYK | User Manual - Page 8
    eyes frequently. • Give your eyes regular breaks by looking away from the monitor and focusing on a distant point. • Blink frequently to keep your eyes from drying out. • For displays with glossy bezels the user should consider the placement of the display as the bezel may cause
  • Acer CB240HYK | User Manual - Page 9
    Developing good work habits Develop the following work habits to make your computer use more relaxing and productive: • Take short breaks regularly and often. • Perform some stretching exercises. • Breathe fresh air as often as possible. • Exercise regularly and maintain a healthy body. ix
  • Acer CB240HYK | User Manual - Page 10
    Italy Tel: +39-02-939-921 ,Fax: +39-02 9399-2913 www.acer.it Declare under our own responsibility that the product: Product: LCD Monitor Trade Name: Acer Model Number: CB240HYK SKU Number: CB240HYK xxxxxx; ("x" = 0~9, a ~ z, A ~ Z, or blank) To which this declaration refers conforms to the
  • Acer CB240HYK | User Manual - Page 11
    for this declaration: Product: Model Number: SKU Number: Name of Responsible Party: Address of Responsible Party: Contact Person: Phone No.: Fax No.: LCD Monitor CB240HYK CB240HYK xxxxxx ("x" = 0~9, a ~ z, or A ~ Z) Acer America Corporation 333 West San Carlos St. Suite 1500 San Jose, CA 95110
  • Acer CB240HYK | User Manual - Page 12
    for your safety and comfort iii Safety instructions iii Cleaning your monitor iii Connecting/disconnecting the device iii Accessibility iv Safe listening iv Warnings iv Using electrical power iv Product servicing v Potentially explosive environments vi Additional safety
  • Acer CB240HYK | User Manual - Page 13
    present when you unpack the box, and save the packing materials in case you need to ship or transport the monitor in the future. LCD monitor Quick start guide DP cable (Optional) HDMI cable (Optional) DVI(Dual Link) cable (Optional) AC Power cord Audio cable (Optional) MHL cable (Optional
  • Acer CB240HYK | User Manual - Page 14
    English ATTACHING/ REMOVING THE BASE Install: Align the base with the stand and push the base towards the top of the monitor, and then rotate the base clockwise. Tighten the screw clockwise. Remove: Reverse the steps to remove the base. Warning: • Actions below are not allowed while
  • Acer CB240HYK | User Manual - Page 15
    to optimize the best viewing position, you can adjust the height/tilt/ swivel/pivot of the monitor. • Height Adjustment After pressing the top of the monitor then you can adjust the height of the monitor. 1 2 150mm • Tilt Please see the illustration below for an example of the tilt range. Only at
  • Acer CB240HYK | User Manual - Page 16
    English • Swivel With the built-in pedestal, you can swivel the monitor for the most comfortable viewing angle. o  • Monitor Pivot Before rotating the display,lift it to the top position and then push it back to the utmost degree. Rotate clockwise until the monitor stops at 90°. 90o 150 4
  • Acer CB240HYK | User Manual - Page 17
    user-adjustment is required. • Plug one end of the power cord to the AC inlet, and plug the other end into an AC outlet. • For units using 120 V AC: Use a UL-listed cord set, type SVT wire and plug rated your system supports the DDC protocol, the monitor is able to plug-and-play.
  • Acer CB240HYK | User Manual - Page 18
    English Connector pin assignment 19-pin color display signal cable 19 171513 11 9 7 5 3 1 18161412 10 8 6 4 2 PIN No. Description 1 TMDS Data2+ 3 TMDS Data2- 5 TMDS Data1 Shield 7 TMDS Data0+ 9 TMDS Data0- 11 TMDS Clock Shield 13 CEC 15 SCL 17 DDC/CEC Ground 19 Hot Plug Detect *
  • Acer CB240HYK | User Manual - Page 19
    8 NC 9 TMDS data 1- 10 TMDS data 1+ 11 TMDS data 1/3 shield 12 TMDS data 3- PIN No. 13 14 15 16 17 18 19 20 21 22 23 24 Description TMDS data 3+ +5 V power GND (return for +5 V hsync.vsync) Hot-plug detection TMDS data 0- TMDS data 0+ TMDS data 0/5 shield TMDS data 5TMDS data 5+ TMDS
  • Acer CB240HYK | User Manual - Page 20
    English Standard timing table Mode 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25* VGA VGA VGA MAC VESA SVGA SVGA SVGA SVGA MAC XGA XGA XGA MAC VESA VESA SXGA SXGA VESA WXGA WXGA+ WSXGA+ FHD
  • Acer CB240HYK | User Manual - Page 21
    computer with the audio cable. 4 Turn on the monitor and computer Turn on the monitor first, then the computer. This sequence is very important. 5 If the monitor does not function properly, please refer to the troubleshooting section to diagnose the problem. HDMI HDMI AUDIO AUDIO IN DP HDMI DVI
  • Acer CB240HYK | User Manual - Page 22
    the monitor ON or OFF. Lights up to indicate the power is turned ON. Using the Shortcut Menu AUTO Input Press the function button to open the shortcut menu. The shortcut menu lets you quickly select the most commonly accessed settings. Empowering: Press the Empowering Key to open the Acer eColor
  • Acer CB240HYK | User Manual - Page 23
    , a floating dialog box indicates:"No Cable Connect" or "No Signal" Acer eColor Management mpowering Technology User ECO Standard Graphics Movie Adjust/Exit Operation instructions Step 1: Press " " Key to open the Acer eColor Management OSD and access the scenario modes Step 2: Press " "/ or
  • Acer CB240HYK | User Manual - Page 24
    OSD can be used for adjusting the settings of your LCD Monitor. Press the MENU key to open the OSD. You can page: Adjusting the picture quality Picture Acer eColor Management Brightness 100 Contrast 50 Gamma mode is for user to adjust Tone of Liminance. The default value is 2.2 (Standard value
  • Acer CB240HYK | User Manual - Page 25
    7. sRGB mode is for user such as DSCs, printers, photographer to get better color matching representation with the peripheral device. 8. Super Sharpness technology can simulate high-resolution images by boosting
  • Acer CB240HYK | User Manual - Page 26
    can be used to adjust the screen Menu Language and other important settings. 4. DP mode selection, the default out of DP signal setting is DP1.2. User can follow the setting message to confirm selection of DP1.2 or DP1.1. 14
  • Acer CB240HYK | User Manual - Page 27
    Product information Information 3840x2160 H:135KHz V:60Hz HDMI Input S/N: ETL5309132635038083742 Exit Enter 1. Press the MENU key to bring up the OSD. 2. Using the / keys, select Information from the OSD. Then the basic information of LCD monitor will show up for current input. 15
  • Acer CB240HYK | User Manual - Page 28
    Before sending your LCD monitor for servicing, please check the troubleshooting list below to see if you can self-diagnose the problem. DVI(Dual Link)/ HDMI mode Problem No picture visible LED status Blue Off Remedy Using the OSD menu, adjust brightness and contrast to maximum or reset
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

Acer LCD Monitor
User’s Guide