Acer CB342CKC User Manual - Page 20

Installation To install the monitor on your host system, please follow the steps below: Steps 1. Connect the video cable a. Make sure both the monitor and computer are switched off. b. Connect the HDMI Cable (Only HDMI-Input Model) (1) Make sure both the monitor and computer are switched off. (2) Connect one end of the 19-pin HDMI cable to the back of the monitor and the other end to the computer's port. c. Connect the DP cable (only for DP models). (1) Make sure both the monitor and computer are switched off. (2) Connect one end of the 20-pin DP cable to the back of the monitor and the other end to the computer's port. 2. Connect the USB Cable(Optional) Connect the USB cable to port for fast charge. Connect the USB cable to port. 3. USB Type-C Cable (Optional, USB Type-C input models only) Connect one end of the USB Type-C cable (optional) to your computer and connect the other end to your electric devices. (power supplier 5V/3A, 9V/3A, 15V/3A, 20V/3.25A) 4. Connect the power cord Connect the power cord to the monitor, then to a properly grounded AC outlet. 5. Turn on the monitor and computer Turn on the monitor first, then the computer. This sequence is very important. 6. If the monitor does not function properly, please refer to the troubleshooting section to diagnose the problem. USB USB USB Type C DP HDMI1 HDMI2 DP Note: Audio output is only for audio output model. Please check user manual for more instruction. 9