Acer CB342CKC User Manual - Page 29

Product the System setting Picture Color Audio Performance OSD System Information Mode - Standard Input Auto Source DP Format Wide Mode PIP/PBP Hot Key Assignment DDC/CI HDMI Black Level HDMI 2(2.0) On DP1.2 Full On Normal 1. Press the key to bring up the OSD. 2. Using the / keys, select System from the OSD. Then navigate to the feature you wish to adjust. 3. Use the / keys to adjust the sliding scales. 4. Input: Select the source from HDMI1 / HDMI2 / DP / DP Alt. 5. Auto Source:The default is "On", can support auto search for signal source in order Note: Surround application must set Auto Source is "Off". 6. DP Format: Default is DP1.2, can selection DP support DP1.1or DP1.2 Note: When FreeSync function is on, DP format is fixed and greyed out. 7. Wide mode: You can select which screen aspect you are using. The options are Full, Aspect and 1:1 Note: 1. Source Mode, HDMI/DP/DP Alt, All of them support 1:1/Full/Aspect. 2. Source Mode, HDMI/DP/DP Alt do not support Wide Mode function while FreeSync is active function. 3. Source Mode, HDMI/DP/DP Alt do not support Wide Mode function while PBP is active function. 4. Source Mode, HDMI supports Full/Aspect while resolution is 3840*2160. 8. PIP/PBP: Select the function of PIP/PBP mode, PIP Position, PBP Size, Sub Source, Source Swap and Audio Source Note: 1. PIP/PBP function does not support HDMI 1 and HDMI 2 simultaneously. 2. Under PIP&PBP mode," Auto search" function is unavailable. The PIP/PBP signal source needs to be selected manually. HDMI1[2.0] Sub HDMI2[2.0] Sub DP Sub HDMI1[2.0] Main O X O HDMI2[2.0] Main X O O DP Main O O O DP Alt Main O O X X: Does not support PIP/PBP function in this input combination DP Alt Sub O O X O 18