Acer E2200HQ User Manual - Page 20
Installation
View all Acer E2200HQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
English Installation To install the monitor on your host system, please follow the steps below: Steps 1 Connect the video cable a Make sure both the monitor and computer are switched off. b Connect the VGA video cable to the computer. c Connect the digital cable (1) Make sure both the monitor and computer are switched off. (2) DVI Cable (Optional, only Dual-Input Model) a. Make sure both the monitor and computer are powered-OFF. b. Connect the DVI cable to the computer. 2 Connect the AC cord Connect one end of the AC cord to the monitor and the other end to a properly grounded, AC outlet. 3 Turn on the monitor and computer Turn on the monitor first, then the computer. This sequence is very important. 4 If the monitor does not function properly, please refer to the troubleshooting section to diagnose the problem. In order to prevent damage to the monitor, do not lift the monitor by its base. 6