Acer EB321QUR User Manual - Page 13
Attaching/removing the base
 |
View all Acer EB321QUR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Attaching/removing the base Installation: Align the front end of the bracket to the corresponding slot on the rear of the monitor, press it from top to bottom, and click it to make sure it is firmly installed. Push the stand against the bracket and turn the screw clockwise to fasten it. By doing so, the bracket shall be installed on the monitor. 1 3 2 Remove: Turn the screw at the bottom of the base counterclockwise and pull it out of the base. Press down the latch at the back of the monitor to release and remove the bracket. 3 1 2 2
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16 -
17 -
18 -
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
 |
 |
2
Attaching/removing the base
Installation: Align the front end of the bracket to the corresponding slot on the rear of the monitor,
press it from top to bottom, and click it to make sure it is firmly installed. Push the stand against the
bracket and turn the screw clockwise to fasten it. By doing so, the bracket shall be installed on the
monitor.
Remove: Turn the screw at the bottom of the base counterclockwise and pull it out of the base. Press
down the latch at the back of the monitor to release and remove the bracket.
1
2
3
1
2
3