Acer EI272UR User Manual - Page 13
Attaching the monitor to the base
View all Acer EI272UR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Attaching the monitor to the base English 1. Unpack the box. Take out the Styrofoam side by side and set flat on the desktop. 2. Take the LCD monitor out of the box carefully and put it on the side by side Styrofoam. Lock Lock 3. Press up the quick release button as illustrated to remove rotary shaft cover. 4. Tighten the rotary shaft, base and stand arm with three screws. (There will be one spare screw left.) 5. Attach the base of step 4 to the quick release notch of the LCD monitor securely. Attaching the monitor on the wall 6. Flip the LCD monitor over to make it stand upright on the desk where it will be used. (Note: Do NOT press the screen to avoid damage any time.) 4 1. Remove the ori ginal screws x 4 Fig. 1 from the opening ba ck of the monitor. 2. Tighten the 4pcs NO.2 screws as Fig 2 Remark: - Please use only the NO. 2 Screws (35 mm x 4 pcs) provided with this type of installation. - Please check monitor weight in advance to choose suitable load capacity of VESA arm stand. - Do not discard the original screws as these may be needed for future use. 3. Connect the monitor onto the wall 2