Acer EI272UR User Manual - Page 26

English Ř Ř Gaming Picture Color Audio Gaming OSD System Information Mode - Standard Over Drive FreeSync Refresh Rate Num AimPoint Normal On Off Off 1. Press the MENU key to open the OSD. 2. Using the !Ř 0 Ř button, select Gaming from the OSD. Then navigate to the setting you wish to adjust. 3. Use the / button to select the setting. 4. Over Drive: Select Off, Normal, or Extreme. 5. FreeSync: Default is On, can choose Off. Note: 1. If FreeSync is "On" , then the Over Drive selection is set to "Normal" automatically. 2. If FreeSync is "OFF", then the user can set Over Drive to either one of the three settings including: (a) Extreme (b) Normal (c) Off. 3. DP and HDMI1 support "FreeSync". 4. If FreeSync is set to "On", please note that the screen might flicker during use. 5. The following situations may happen when playing games with FreeSync enabled: • Depending on the type of graphic cards, the game settings, and the video you are playing, a flickering screen may occur. Please try to set current FreeSync mode to "Off ", or visit the official AMD website to update the graphic card's driver. • When using FreeSync, the screen may flicker due to different output frequencies of the graphics card. • When FreeSync is set to "On " , changing the resolution may result in screen-tearing. It is recommended to set FreeSync to "Off" and then change the resolution. 6. Refresh Rate Num: Display the panel's current refresh rate on the screen. Note: If FreeSync set "On" you can see the V Frequency to changes in the OSD. 7. Aim Point: Show an Aim point on the screen for shooting games. 15