Acer F217 User Guide - Page 45
To Change the Lamp, Pull out the lamp module by force. Illustration #6
View all Acer F217 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
English 35 To Change the Lamp 1 Turn off the projector by pressing the power button. 2 Allow the projector at least 30 mins to cool down. 3 Disconnect the power cord. 4 Open the screw covers on both sides of the projector. (Illustration #1) 5 Remove the two screws on both sides of the projector at the same time. (Illustration #2) 6 Open the top cover. (Illustration #3) 7 Remove the three screws that secure the lamp module (Illustration #4) and pull up the lamp bar.(Illustration #5) 8 Pull out the lamp module by force. (Illustration #6) To replace the lamp module, reverse the previous step. Warning: To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb. The bulb may shatter and cause injury if it is dropped.