Acer GF276 User Manual - Page 28
Hot Key Assignment: Select the function of Hot Key 1 or Hot Key 2.
View all Acer GF276 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
2. Press the MENU key to open the OSD. 3. Using the / keys, select System from the OSD. Then navigate to the setting you wish to adjust. 4. Use the / keys to select the setting. 5. Input: Select the source from HDMI, DP In or VGA. 6. Auto Source: Automatically searches for available input sources. 7. DP Format: You can select which DP format you are using. The default is set at DP1.2. 8. Hot Key Assignment: Select the function of Hot Key 1 or Hot Key 2. 9. Wide Mode: You can select which screen aspect you are using. The options are Full and Aspect. 10. DDC/CI: Allows the monitor settings to be set through the software on the PC. Note: DDC/CI, short for Display Data Channel/Command Interface, which allows monitor controls to be sent via software. 11. HDMI Black Level: You can select the level of blackness under HDMI source. The options are Normal and Low. 12. Quick Start Mode: Enable monitor rapidly. EN-18