Acer K137i Instruction Manual - Page 26
Image
View all Acer K137i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
English 16 Image Projection Mode • • Projection Location • • Front: The factory default setting. Rear: Reverses the image so you can project from behind a translucent screen. Auto: Automatically adjusts projection location of image. Desktop Aspect Ratio Auto Keystone Manual Keystone • Ceiling: Turns the image upside down for ceiling-mounted projection. Use this function to choose your desired aspect ratio. • Auto: Keep the image with original width-higth ratio and maxi mize the image to fit native horizontal or vertical pixels. • 4:3: The image will be scaled to fit the screen and displayed using a 4:3 ratio. • 16:9: The image will be scaled to fit the width of the screen and the height adjusted to display the image using a 16:9 ratio. • Full: Resize image to fit full screen by width (1280 pixels) and height (800 pixels). • L.Box: Keep original signal aspect ratio and zoom in by 1.333 times. Automatically adjusts vertical image. Adjust image distortion caused by tilting projection. (±40 degrees) Sharpness H. Position V. Position Frequency The Manual Keystone function is unavailable under Auto Keystone setting to "On". Adjust the sharpness of the image. • Press to decrease the sharpness. • Press to increase the sharpness. • Press • Press to move the image left. to move the image right. • Press • Press to move the image down. to move the image up. "Frequency" changes the projector's refresh rate to match the frequency of your computer's graphics card. If you can see a vertical flickering bar in the projected image, use this function to make the necessary adjustments.