Acer L811 User Manual - Page 31
USB 5V, Standby, HDMI CEC, Low Input Lag, LAN Standby, LAN IP/Mask, MAC Address, LAN Reset, Reset
View all Acer L811 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
English USB 5V (Standby) HDMI CEC 21 Selecting "On" enables the function. The MHL port(s) and the DC 5V out port/USB A port (if available) on the projector can output 5V power when the projector is turned on or in standby mode. Only MHL port(s) will provide power output when MHL port(s) and USB A port are both plugged. Selecting "On" allows synchronized power ON/OFF operation between the projector and a CEC-compatible device connected to the HDMI port of the projector. This function is only available for the HDMI port. This function is especially suitable for gaming environment. It reduces input to output latency and helps create a seamless experience. Low Input Lag LAN Reset This function is only available for certain input timings. After turned on, performing Auto Keystone or adjusting the following settings will deactivate this function: Aspect ratio, Keystone, H. Position, V. Position, Frequency, HDMI Scan Info, Digital Zoom. When Display Mode is Game Dark or Game Bright, this function will be automatically turned on. LAN (Standby) The default value is "Off". Choose "On" to enable the LAN connection. LAN IP/Mask Identify IP and Mask address. MAC Address Identify MAC address. DHCP Selecting "On" when you are in a DHCP environment to obtain the IP address automatically. Selecting "Off" and you'll have to manually assign the IP Address, Subnet Mask, Gateway and DNS. LAN Reset Press "ENTER" after choosing "Yes" to return all items on the LAN Setting page to the default settings. Press "ENTER" after choosing "Yes" to return the display parameters on all menus to the factory default settings. Using a web browser to control your projector 1. Make sure that your PC and the projector are connected to the same local