Acer P1250 User Manual - Page 35
Screen Capture, Source Selection, Closed Caption, DC 5V Out, VGA OUT, Standby, Acer to User.
View all Acer P1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
25 English Use this function to customize the startup screen. To capture the image that you want to use as the startup screen, follow the instructions below. Notice Before proceeding with the following steps, make sure that the "Keystone" is set to the default value "0" and the projector is in its native resolution. • Screen Capture • Change the "Startup Screen" from the default setting "Acer" to "User". Select "Screen Capture" to customize the startup screen. • A dialog box appears to confirm the action. Choose "Yes" to use the current image as your customized startup screen. Choose "No" to cancel the screen capture and exist the Onscreen Display (OSD). • A message appears stating that the screen capture is in progress. • When the screen capture is finished, the message disappears and the original display is shown. • Manual: When switching input signals, you need to press Source Selection "SOURCE" on the control panel or remote control, or the direct source key on the remote control. • Auto: The projector will detect your source automatically. Selects a preferred closed captioning mode from CC1, CC2, CC3, CC4 (CC1 displays captions in the primary language in Closed Caption your area). Select "Off" to turn off the captioning feature. This function is only available when a composite video or S- Video input signal is selected and its system format is NTSC. DC 5V Out Selecting "On" enables the function. The MHL port(s) and the DC 5V out port/USB A port (if available) on the projector can output 5V power when the projector is turned on. VGA OUT (Standby) Only MHL port(s) will provide power output when MHL port(s) and USB A port are both plugged. Selecting "On" enables the function. The projector can output a VGA signal when it is in standby mode and the VGA IN (or VGA IN 1) and VGA OUT sockets are correctly connected to the devices. Enabling this function increases the standby power consumption.