Acer PH110 User Guide - Page 33
Lamp Changing Procedure, To replace the lamp module, reverse the previous steps. - bulb
View all Acer PH110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Appendices NOTE Warning: To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb. The bulb may shatter and cause injury if it is dropped. Lamp Changing Procedure: 1. Turn the power off the projector by pressing the " " button. 2. Allow the projector to cool down at least 30 minutes. 3. Disconnect the power cord. 4. Use a screwdriver to remove the screw from the cover. 1 5. Push up and remove the cover. 2 6. Remove the 2 screws from the lamp module. 3 7. Pull out the lamp module. 4 To replace the lamp module, reverse the previous steps. 33 ... English
... English
33
Appendices
Warning:
To reduce the
risk of personal injury,
do not drop the lamp
module or touch the
lamp bulb. The bulb may
shatter and cause injury
if it is dropped.
N
OTE
Lamp Changing Procedure:
1.
Turn the power off the projector by pressing the “
”
button.
2.
Allow the projector to cool down at least 30 minutes.
3.
Disconnect the power cord.
4.
Use a screwdriver to remove the screw from the cover.
1
5.
Push up and remove the cover.
2
6.
Remove the 2 screws from the lamp module.
3
7.
Pull out the lamp module.
4
To replace the lamp module, reverse the previous steps.