Acer RC241YU User Manual - Page 19

English Installation To install the monitor on your host system, please follow the steps below: Steps 1 Connect the digital cable a. DVI Cable (Optional, only Dual-Input Model) (1) Make sure both the monitor and computer are powered-OFF. (2) Connect the DVI (Dual Link) cable to the computer. b. HDMI Cable (Optional, only HDMI-Input Model) (1) Make sure both the monitor and computer are powered-OFF. (2) Connect the HDMI cable to the computer. c. DP Cable (Optional, only DP-Input Model) (1) Make sure both the monitor and computer are powered-OFF. (2) Connect the DP cable to the computer. d. Connect the audio cable (Optional, only Audio-input Model). 2 Connect the adapter a. Connect the AC cord to the adapter. b. Connect one end of the adapter to the monitor and the other end to a properly grounded, AC outlet. 3 Turn on the monitor and computer Turn on the monitor first, then the computer. This sequence is very important. 4 If the monitor does not function properly, please refer to the troubleshooting section to diagnose the problem. HDMI DVI-IN DVI-IN HDMI DP AUDIO IN HDMI DP HDMI DC IN Note: Audio output is only for audio output model. In order to prevent damage to the monitor, do not lift the monitor by its base. 7