Acer T231H User Manual - Page 13

INSTALLATION To install the monitor to your host system, please follow the steps as given below: Steps 1. 1-1 Connect Video Cable a. Make sure both the monitor and computer are powered-OFF. b. Connect the VGA video cable to the computer. 1-2 Connect Digital Cable (Only Dual-Input Model) a. Make sure both the monitor and computer are powered-OFF. b. Connect one end of the 24-pin DVI cable to the back of the monitor and connect the other end to the computer's port. 1-3 Connect HDMI Cable (Only HDMI-Input Model) a. Make sure both the monitor and computer are powered-OFF. b. Connect the HDMI cable to the computer. 2. Connect the USB Cable(Optional) 3.Connect the Audio Cable(Only Audio-Input Model)(Optional) 4. Connect power cord Connect the power cord to the monitor, then to a properly grounded AC outlet. 5. Power-ON Monitor and Computer Power-ON the monitor first, then power-ON the computer. This sequence is very important. 6. If the monitor still does not function properly, please refer to the troubleshooting section to diagnose the problem. AC IN AUDIO IN 3 HDMI DVI-D IN VGA IN USB H D MI D VI V GA 3 1-3 1-2 1-1 2 EN-12 2 1-1 1-2 1-3 3 VGA DVI HDMI