Acer TravelMate 230 TravelMate 230/280 Service Guide - Page 99

NOTE: 1. Please follow the numeric orders such as 1, 2, 3, and 4 to screw the PCMCIA plate to the main board. It is suggested that you reverse the sequence when you remove the screws. 2. Please note that the I/O port bracket should be attached to the main board before assembling the PCMCIA slot to the main board. Removing the I/O Port Bracket 1. See "Removing the Battery" on page 64 2. See "Removing the Hard Disk Drive Module" on page 65 3. See "Removing the Middle Cover" on page 70 4. See "Removing the Keyboard" on page 71 5. See "Removing the CD-ROM Drive Module" on page 71 6. See "Removing the Heat Plate" on page 72 7. See "Removing the LCD Module" on page 73 8. See "Removing the RTC Battery" on page 81 9. See "Removing the CPU Heat Sink" on page 82 10. See "Removing the Upper Case" on page 83 11. See "Removing the Floppy Disk Drive Module" on page 86 12. See "Removing the Audio Board" on page 87 13. See "Removing the Charger Plate" on page 88 14. See "Removing the Main Board" on page 89 15. See "Removing the PCMCIA Slot" on page 90 16. Remove the four hex screws to detach the I/O port bracket from the main board. Chapter 3 91