Acer Veriton 3200 Veriton 3200 Service Guide - Page 30

System Information The following screen appears if you select System Information from the main menu. System Information Processor Pentium III Processor Speed 600 MHz Level 1 Cache 32 KB, Enabled Level 2 Cache 256 KB, Enabled Floppy Drive A 1.44 MB 3.5-inch Floppy Drive B None IDE Primary Channel Master .......... HardDisk,xxxx M.B. IDE Primary Channel Slave None IDE Secondary Channel Master ........ IDE CD-ROM IDE Secondary Channel Slave ......... None Total Memory 64 MB 1st Bank SDRAM, 32 MB 2nd Bank SDRAM, 32 MB 3rd Bank None Serial Port 1 3F8h, IRQ 4 Serial Port 2 Disabled Parallel Port 378h, IRQ 7 PS/2 Mouse Installed This page shows the current basic configuration of your system. The following table describes the parameters found in the System Information pages: Parameter Description Format Processor Specifies the type of processor currently installed in your system. Processor Speed Specifies the speed of the processor currently installed in your system. Level 1 Cache Specifies the first-level or the internal memory (i.e., the memory integrated into the processor) size, and whether it is enabled or disabled. Cache size in KB Level 2 Cache Specifies the second-level cache memory size currently supported by the system. Cache size in KB Floppy Drive A Shows the diskette drive A type. Capacity, dimension Floppy Drive B Shows the diskette drive B type. Capacity, dimension IDE Primary Channel Master Specifies the current configuration of the IDE Drive type, capacity device connected to the master port of the primary IDE channel. IDE Primary Channel Slave Specifies the current configuration of the IDE device connected to the slave port of the primary IDE channel. Drive type, capacity 23 Chapter 2