Acer Veriton 3200 Veriton 3200 Service Guide - Page 58
Opening the Housing, Removing the Housing Cover - driver
View all Acer Veriton 3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Opening the Housing This section tells you how to open the housing cover when you need to install additional components inside the system unit. CAUTION: Before you proceed, make sure that you have turned off the system and all peripherals connected to it. Removing the Housing Cover 1. Place the system unit on a flat, steady surface. 2. Turn the housing back. 3. Remove the two screws using a screw driver from the rear panel as shown here. Set the screws aside, you will need them when replacing the right panel of the unit. 4. Slide the upper case back out about an inch and then gently pull it outward to detach it from the housing. 51 Chapter 3