Acer Veriton 3600GT Veriton 3600GT User's Guide - Page 69
Installing an expansion card, When you turn on the computer, BIOS Basic Input/Output System
View all Acer Veriton 3600GT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
63 6 Install the new hard disk into the housing. Secure it with the drive rails you removed earlier and connect the power and hard disk cables to the new hard disk. 7 Reinstall the drive frame into the housing. 8 Reattach the CD or DVD drive and the floppy drive cables. Note: Make sure that the other ends of the disk drive cables are securely connected to their corresponding connectors on the mainboard. 9 Replace the computer cover (see page 52). Installing an expansion card To install an expansion card: Caution: Your system accepts low profile PCI cards only. 1 Remove the computer cover (see page 51). 2 Locate an empty PCI slot on the mainboard. 3 Remove the bracket lock that holds the bracket to the computer. Save the bracket lock. 4 Pull out the bracket on the housing opposite the selected empty slot. 5 Remove the expansion card from its protective packaging. 6 Align the card with the empty bracket and then insert it into the slot. Make sure that the card is properly seated. 7 Secure the card to your computer with the bracket lock you removed earlier. 8 Replace the computer cover (see page 52). When you turn on the computer, BIOS (Basic Input/Output System) automatically detects and assigns resources to the newly-installed devices.