Adaptec 2015S Software User Guide - Page 107
Controller-Specific, -a Action (task) control, -F Update controller firmware, BIOS, or NVRAM
UPC - 760884139943
View all Adaptec 2015S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Adaptec Storage Management Software User's Guide Controller-Specific -a Action (task) control This switch has the following options which allow you to control tasks on the controller: List Build Rebuild Verify Stop Shows tasks for the controller Starts build of logical drive Starts rebuild on logical drive Starts a verify operation Terminates active task on drive Specify drives by the device address. -F Update controller firmware, BIOS, or NVRAM This option updates the controller flash memory (EEPROM). Specify an image file name on the command line. -X Reset NVRAM configuration This option resets the controller NVRAM to the factory default settings. -Z Reset/clear embedded RAID information This option destroys all RAID information pertaining to disk arrays and logical drives for the specified device. Specify logical drives by using the device address. All specified drives become individual, unassigned physical drives after this command is used. ! Caution: There is no procedure to reverse the effect of the -Z operation. This option is a method of last resort for deleting conflicting RAID table information. 4-8