Adaptec 2020ZCR Reference Guide - Page 126
container set failover
UPC - 760884151136
View all Adaptec 2020ZCR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
container Commands container set failover To assign an automatic failover disk(s) for a single array, use the container set failover command. If the array was already assigned a failover disk(s), the command adds the specified disk(s) to the array's list of failover disk(s). Although all array types accept failover assignments, only mirror set and RAID 5 array (redundant) array types use the failover assignment if a disk fails. Syntax container set failover {container} {scsi_device} [{scsi_device}...] Parameters {container} Specifies the ID number (0 to 63) of the array on which to assign an automatic failover disk(s). {scsi_device} Specifies the ID for the SCSI device that you want to assign as a failover disk to the array specified in the container parameter. A SCSI ID consists of a SCSI channel number (for example, 0, 1, 2, 3, etc.), a SCSI device ID (0 through 15 inclusive), and a SCSI device logical unit number (0 through 7 inclusive). For further details, see scsi_device on page 1-10. {scsi_device}... Specifies the ID(s) for additional SCSI device(s) that you want to assign as failover disk(s) to the array specified in the container parameter. Examples Before assigning a SCSI device as a failover disk to an array, use the container list command to obtain information about any existing arrays. 3-95