Adaptec 2020ZCR Reference Guide - Page 184

disk Commands disk set smart To change a device's S.M.A.R.T. configuration, use the disk set smart command. The acronym S.M.A.R.T. stands for SelfMonitoring, Analysis and Reporting Technology. This technology is an industry standard for hard drives that monitors a variety of disk parameters, such as the rate of read-write errors. In addition, S.M.A.R.T. can send an alert to system administrators about potential problems caused by disk errors. This command allows you to make the following changes related to S.M.A.R.T.: I Enable or disable S.M.A.R.T. configuration for all disks on the system I Clear the S.M.A.R.T. error count for the specified disk I Enable or disable S.M.A.R.T. exception reporting Syntax disk set smart [/all{=boolean}][/clear{=boolean}] [/enable_exceptions{=boolean}][/logerr{=boolean}] [/perf{=boolean}][/report_count{=integer}] [/update{=boolean}] [{scsi_device}] Parameters {scsi_device} Specifies the ID for the SCSI disk on which you want to change S.M.A.R.T. configurations. A SCSI ID consists of a SCSI channel number (for example, 0, 1, 2, 3, etc.), SCSI device ID (0 through 15 inclusive), and SCSI device logical unit number (0 through 7 inclusive). For further details, see scsi_device on page 1-10. You do not need to specify a SCSI ID if you use the /all switch. Switches /all{=boolean} 5-13