Adaptec 2093400 User Guide - Page 36
Next Steps, Monitoring Disk Drives with Adaptec Storage Manager
View all Adaptec 2093400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Chapter 5: Installing the Controller and Disk Drives ● 36 Next Steps If you are installing the controller driver and an operating system onto a bootable array, continue with Creating a Bootable Array on page 37. If you are completing a standard installation onto an existing operating system, continue with Installing the Driver on an Existing Operating System on page 49. Monitoring Disk Drives with Adaptec Storage Manager Adaptec Storage Manager allows you to monitor the status of your SAS, SATA, or SCSI disk drives. Within Adaptec Storage Manager, you can select a disk drive object and a command will be sent to the backplane (for internal disk drives) or enclosure (for external disk drives). The LED associated with that disk drive will flash. The following table describes the LED flash states. For more information refer to the Adaptec Storage Manager Help. Controller Device State Failed Rebuilding Blink Other Slot State Device is faulty Device is rebuilding Identify the device No error LED Flash State On Slow flash Fast flash Off