Adaptec 2093400 User Guide - Page 98
System Requirements, Compatibility Notes, Before You Begin, Obtaining the Firmware
View all Adaptec 2093400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Appendix E: Using the Adaptec Flash Utility ● 98 System Requirements ● MS-DOS version 5.0 or later. Note: You can't run the AFU from a DOS command prompt window under any version of Windows. ● At least 8 MB of extended memory. Compatibility Notes ● Supports HIMEM.SYS; compatible with other DOS drivers running under HIMEM.SYS (for example, SMARTDRV.SYS and SETVER.SYS). ● Does not support DOS extenders installed in memory, such as EMM386.SYS and DOS4GW. Before You Begin 1 Obtain the firmware (see the following section). 2 Create a firmware kit on floppy disks (see page 99). There are two ways to run the AFU: 1 Using the AFU menus (see page 99) 2 From the command line (see page 100) Obtaining the Firmware To obtain RAID controller firmware, go to: ● The RAID Installation CD-Includes the AFU executable (AFU.exe) and a separate flash image. The flash image may comprise multiple User Flash Image (UFI) files. ● The Adaptec Web site-Download a new firmware file to get the most recent version of AFU. See www.adaptec.com for more information.