Adaptec 2200S Software Reference Manual - Page 220

Adaptec SCSI RAID Software Reference Guide The Array Num and Array Type Columns The Array Num column displays the ID of the primary array in the partition. In the example, the array ID is 0. The Array Type column displays the type of array in which the partition resides. Table 7-3 lists the possible values that the command can display in the Type column. Table 7-3. Primary Array Values Value None Mirror Stripe Volume RAID-5 Reconf Meaning This partition is not in an array. This partition is part of a mirror set. This partition is part of a stripe set. This partition is part of a volume set. This partition is part of a RAID-5 set. This partition is part of an array reconfiguration operation. An array reconfiguration operation occurs when you use the array reconfigure command to change an array from one type to another. The Reconf value is not used in UNIX. The MultiLevel Num and MultiLevel Type Columns The MultiLevel Num column displays the ID of the multilevel array the partition is associated with (if any). In the example, the array ID is 0. The MultiLevel Type column displays the type of multilevel array in which the partition resides. Table 7-4 lists the possible values that the command can display in the Type column. Table 7-4. Multilevel Array Values Value None Stripe Volume Meaning This partition is not in a secondary array. This partition is part of a stripe set. This partition is part of a volume set. 7-20