Adaptec 29160LP Installation Guide - Page 11

STEP 5 Double-check for proper SCSI bus termination. CAUTION Using a single-ended terminator will cause the SCSI bus to run in single-ended mode. LVD termination must be used to obtain Ultra2 transfer rates. ADAPTEC SCSI CARD DRIVER SOFTWARE To use the Adaptec SCSI Card 29160LP, the card's driver software must be installed for your operating system (for example, Windows® 98, Windows 2000, Windows NT®, Novell NetWare, and so forth). The Ultra160 Family Manager Set contains driver software for many of the popular operating systems. Refer to the Ultra160 Family Manager Set User's Guide and Adaptec SCSI Card 29160LP User's Reference for instructions on either installing driver software when installing your operating system, or installing driver software when the operating system is already installed. NOTE Operating system versions released after November 1999, may have embedded driver support for the Adaptec SCSI Card 29160LP. To determine if the card is supported by the operating system you are using, read the operating system manual or contact the operating system vendor for information. Visit Microsoft's Web site for more information regarding hardware compatibility. 10