Adaptec 29160LP Installation Guide - Page 5

STEP 4 Insert the Adaptec SCSI Card 29160LP into the PCI expansion slot. Press down firmly until the card clicks into place; then replace the slot cover screw. When installed properly, the card should appear level with the expansion slot, as shown below. SETTING UP SCSI DEVICES You may need to do several things to your SCSI devices before you connect them to the Adaptec SCSI Card 29160LP: • Check the SCSI IDs. • Set the termination. • Connect the power cables. Since setup can vary from device to device, always refer to the documentation supplied with the device for specific instructions. Below are some guidelines for setting SCSI IDs and termination on your devices. Refer to the Adaptec SCSI Card 29160LP User's Reference for more information on these topics. Check the SCSI IDs The Adaptec SCSI Card 29160LP and each device you connect to it must have a unique SCSI ID number ranging from 0 to 15. No two devices can have the same number. 4