Adaptec 39320-R Installation Guide - Page 11

TROUBLESHOOTING If you have any problems while installing the Adaptec SCSI Card 39320, check the following items first: •Are all SCSI devices powered on? •Are all SCSI cables and power cables properly connected? •Does each device on each SCSI bus have a unique SCSI ID? •Does the total SCSI cable length exceed the maximum allowable length? •Is the SCSI bus properly terminated? If you are still unable to resolve a problem, contact the system manufacturer for help. ADAPTEC SCSI CARD DRIVER SOFTWARE NOTE To use the Adaptec SCSI Card 39320, driver software must be installed for your operating system. Installation of the driver software varies depending on how and where you purchased the Adaptec SCSI Card 39320. Preloaded Adaptec Drivers If the Adaptec SCSI Card 39320 was included as part of a computer system you purchased, the system already has the appropriate Adaptec driver preinstalled by the computer manufacturer. No further action is necessary to install the driver. Embedded Adaptec Drivers Some operating systems have embedded driver support for the Adaptec SCSI Card 39320. To determine if the card is supported by the operating system you are using, read the operating system manual or contact the operating system vendor for information. 10