Adaptec 39320-R Installation Guide - Page 7
The Adaptec SCSI Card 39320 has two separate Ultra320/160
 |
UPC - 760884140222
View all Adaptec 39320-R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
The Adaptec SCSI Card 39320 has two separate Ultra320/160 SCSI channels, as shown in the figure on page 1. Both channels have an internal LVD/SE connector to which you can connect internal SCSI devices. NOTE Adaptec recommends that you keep your Ultra320/160 and Ultra2 SCSI devices on a separate SCSI channel from your Ultra SCSI devices. This allows the newer Ultra320/160 and Ultra2 SCSI devices to transfer data at their maximum speed. STEP 1 Follow these steps to connect your internal Ultra320/160 and Ultra2 devices: Locate a 68-pin internal LVD SCSI cable, which may have either twisted wires or flat wires, as shown here. Terminated end Nonterminated end 6
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13
-
14
 |
 |
6
The Adaptec SCSI Card 39320 has two separate Ultra320/160
SCSI channels, as shown in the figure on page 1. Both channels
have an internal LVD/SE connector to which you can connect
internal SCSI devices.
Follow these steps to connect your internal Ultra320/160 and
Ultra2 devices:
Locate a 68-pin internal LVD SCSI cable, which may have either
twisted wires or flat wires, as shown here.
Adaptec recommends that you keep your Ultra320/160
and Ultra2 SCSI devices on a separate SCSI channel from your
Ultra SCSI devices. This allows the newer Ultra320/160 and
Ultra2 SCSI devices to transfer data at their maximum speed.
N
OTE
S
TEP
1
Terminated end
Nonterminated end