Adaptec 4805SAS User Guide - Page 59
Installing on UnixWare, Installing on VMware
UPC - 760884149362
View all Adaptec 4805SAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Chapter 8: Installing the Driver on an Existing Operating System ● 59 Installing on UnixWare To install the driver on UnixWare: 1 Start your computer, then insert the driver disk. 2 Begin the driver package installer: pkgadd -d diskette1 3 At the installer prompt, type go. 4 Select 1 for the aacraid package. 5 When the installation is complete, select q to quit the installer. 6 Reboot your computer and remove the driver disk. 7 Continue with Managing Your Storage Space on page 61. Installing on VMware Note: The embedded driver provided by VMware should be suitable for most applications. If an updated driver is needed, use the following procedure. To install the driver on VMware: 1 Start your computer, then insert the driver disk. 2 At the console screen of the VMware server, mount the Adaptec CD: mount -r /dev/cdrom /mnt/cdrom. 3 Install the module RPM: rpm -ivh /mnt/cdrom/xxx/yyy.rpm where xxx is the driver path, and yyy.rpm is the rpm file. 4 Reboot your computer and remove the driver disk. Note: Currently, Adaptec Storage Manager is not supported on VMware. To create and manage arrays, use the ARC utility. See page 63 for more information.