Adaptec 5325301841 User Guide - Page 2

Installing a SAS HBA Card Snap Server 4500 2 Standing in front of the server, press down firmly on the cover with both hands, and push the cover backwards with a short, forceful thrust. Slide the cover off the rear of the server and set it aside. 3 Remove the plastic PCI retention clip from the right rear corner of the server by lifting it out of the chassis. Back right corner of server (back view) 4 If a SCSI card is installed, remove the card and set it aside. Avoid contact with metal surfaces on the card. Installing the SAS Card and Reinserting the SCSI Card PCI cards are seated properly only when you hear a distinct "snap" sound. 1 Remove the metal protective plate from the bottom PCI port opening by using your thumb to slide the plate towards the corner of the server and lifting it from the chassis. 2 Remove the SAS card from its protective packaging. Avoid contact with metal surfaces on the card. 2 Field Service Documentation Copyright © 2009, Overland Storage, Inc. All rights reserved. Information in this document is subject to change without notice and does not represent a commitment on the part of Overland Storage or any of its subsidiaries.