Adaptec 5325301841 User Guide - Page 3
Replace the plastic PCI retention clip in the server chassis., If you do not have a SCSI card
UPC - 753253018413
View all Adaptec 5325301841 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Snap Server 4500 Installing a SAS HBA Card 3 Install the SAS HBA card into the lower (PCIX) slot by grasping only the edges of the card and pressing firmly until it snaps into place. SCSI SAS HBA PCI PCIX Back right corner of server (back view) 4 Do one of the following: • If reinserting the SCSl card to the upper (PCI) slot, grasp only the edges of the card and press firmly until it snaps into place. • If you do not have a SCSI card, be sure to replace the metal protective plate on the top PCI port. 5 Replace the plastic PCI retention clip in the server chassis. 6 Replace the top cover of the Snap Server by lowering it onto the server and pushing it forward until it is firmly seated. To secure the cover, tighten the screw at the rear of the server. Do not operate the Snap Server without the top cover in place. 7 Replace the Snap Server in the rack and reconnect the cables. Field Service Documentation 3 Copyright © 2009, Overland Storage, Inc. All rights reserved. Information in this document is subject to change without notice and does not represent a commitment on the part of Overland Storage or any of its subsidiaries.