Adaptec 5405Z User Guide - Page 17

Chapter 2: Using the Command Line Utility ● 17 arcconf getstatus The GETSTATUS function displays the status of any background command that is currently running. Including information about the most recent rebuild, synchronization, logical-drive migration, and compaction/expansion. The information includes the type of operation, status, logical drive number, logical drive size, and percentage of the operation completed. Note: 1 GETSTATUS reports currently active operations for both ARCCONF commands and commands issued from the Adaptec Storage Manager. 2 GETSTATUS reports verify, clear, initialize, and secure erase operations on physical devices. 3 GETSTATUS only reports active operations. It does not display information if the operation is completed. Syntax ARCCONF GETSTATUS Parameters Controller# is the controller number Example ARCCONF GETSTATUS 1 arcconf getversion Lists version information for all controllers or a specific controller's software components, including information about the BIOS, driver, firmware currently running, and firmware that will run after a reboot. Note: The firmware version that will run after a reboot is called the "staged" firmware. Syntax ARCCONF GETVERSION (use this for information on all controllers) ARCCONF GETVERSION (use this for information on a specific controller) Parameters Controller# is the controller number Example ARCCONF GETVERSION arcconf identify Identifies a physical or logical device by blinking its LEDs. Syntax ARCCONF IDENTIFY LOGICALDRIVE ARCCONF IDENTIFY DEVICE