Adaptec 5405Z User Guide - Page 19
arcconf rescan, arcconf romupdate - bios
UPC - 760884156179
View all Adaptec 5405Z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Chapter 2: Using the Command Line Utility ● 19 ● Desired size in MB. RAID# is the RAID level for the logical drive 0, 1, 5, 5EE, or 10. Note: The CHANNEL# and DRIVE# parameters is the list of devices that will contain the target modification object. Channel# is the channel number for the device. Drive# is the device_ID (device number) for the device. Note: Channel and device_ID are repeatable parameters. Noprompt is an optional parameter that overrides the user prompt. Example ARCCONF MODIFY 1 FROM 2 TO 2048 0 0 123 0 124 0 117 arcconf rescan Enables the controller to check for the removal of any disk drives in the ready state and to check for the connection of any new disk drives to the controller. The command returns when the rescan is complete. Syntax ARCCONF RESCAN Parameters Controller# is the controller number Example ARCCONF RESCAN 1 arcconf romupdate Allows new firmware and BIOS to be flashed to the controller. A reboot is required for the new firmware to take effect. Note: 1 This function is only supported in Windows and Linux. 2 Be sure to copy the *.UFI update files from the CD and not from the BIOS/Firmware update diskettes. Syntax ARCCONF ROMUPDATE Parameters Controller# is the controller number BaseName is the name of the ROM image basename or the fully qualified name if you have a set of controller ROM images. Note: All UFI files must be in the same directory prior to invoking ARCCONF. If you are copying UFI files from floppy images, be sure to check all images. Example ARCCONF ROMUPDATE 1 AC2200 ARCCONF ROMUPDATE 1 AC220001.UFI