Adaptec AHA-2930CU Installation Guide - Page 11

6 Reconnect the power cord to the computer and connect power cables to the external SCSI devices. Turn on the SCSI devices and allow them to power up. Then turn on the computer. 7 Continue with the next section, Installing Drivers. Installing Drivers This Guide provides basic driver installation instructions for Windows XP, 2000, Me, 98, and 95. For Windows NT 4.0 driver installation instructions, refer to the SCSI Card 2930CU User's Guide on the SCSI Card 2930 CD. Note: For more detailed driver installation instructions and for instructions on verifying the driver installation, refer to the SCSI Card 2930CU User's Guide on the SCSI Card 2930 CD. Install the SCSI Card 2930CU driver by following the instructions appropriate to your computer's operating system. Windows 2000 and Windows XP In Windows 2000 and Windows XP, driver installation is fully automatic, including the identification of compatible drivers. 11