Adaptec AHA-2940 Installation Guide - Page 5
Onnecting, Xternal, Evices
UPC - 571990000825
View all Adaptec AHA-2940 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
2940UWPro-ig.qxd 12/21/98 9:55 AM Page 5 STEP 7 Connect a power cable from your computer's power supply to the power input connector on each SCSI device. Power Input Connector on the Back of the Drive Power Cable (From the Power Supply Inside the Computer) STEP 8 Replace your computer cover. If you are installing external SCSI devices, continue with the next section; otherwise, skip to Installing the SCSI Card 2940UW Pro Software. CONNECTING EXTERNAL SCSI DEVICES STEP 1 Verify that each external SCSI device you are installing has a unique SCSI ID from 0 to 6 (0 to 6 and 8 to 15 for "Wide" SCSI devices). Refer to the device's documentation to determine the SCSI ID setting. If any two devices (external or internal) you are connecting to the SCSI Card 2940UW Pro share the same SCSI ID, change the SCSI ID on one device. The SCSI Card 2940UW Pro is preset to SCSI ID 7 and should not be changed. For most external SCSI devices, the SCSI ID usually is set with a switch on the back of the device. See the SCSI Card 2940UW Pro User's Reference for additional information on SCSI IDs. SCSI ID Switch 5