Adaptec USB2CONNECT User Guide - Page 13

My Computer, Properties, Device Manager, Bus Host Controller right-click - pci

Page 13 highlights

USB2connect User's Guide 4 To verify that the driver is installed under the Universal Serial Bus Host Controller section right-click My Computer, select Properties, and then select the Device Manager tab. USB2.0 function; see Note below USB1.1 drivers for the USB2connect Note: Under Other devices, a yellow ! appears before PCI Universal Serial Bus because at this writing there are no 2.0 drivers for USB2connect. However, the USB 1.1 drivers included with Windows Me operating system are compatible with USB2connect. For updated driver information, check the Adaptec Web site at http://www.adaptec.com. 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27

8
USB2connect User’s Guide
4
To verify that the driver is installed under the Universal Serial
Bus Host Controller section right-click
My Computer
, select
Properties,
and then select the
Device Manager
tab.
Note:
Under Other devices, a yellow
!
appears before PCI
Universal Serial Bus because at this writing there are no 2.0
drivers for USB2connect. However, the USB 1.1 drivers
included with Windows Me operating system are
compatible with USB2connect. For updated driver
information, check the Adaptec Web site at
.
USB1.1 drivers
for the
USB2connect
USB2.0 function;
see Note below