Adaptec XHub4 User Guide - Page 14
Installing Drivers, Windows 2000/Me/98SE, Double-checking Driver Installation - hub
UPC - 760884138434
View all Adaptec XHub4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Installing Drivers Installing Drivers USB 2.0 driver software with hub support must be installed on your computer for the XHub for Notebooks to operate at USB 2.0 speeds. If you are using an Adaptec USB 2.0 controller, install the USB 2.0 drivers provided on the XHub for Notebooks CD. Note: The drivers provided on the XHub for Notebooks CD will not work with non-Adaptec USB 2.0 controllers. Refer to your controller's manufacturer for driver information. Follow the instructions for your Operating System (OS) to install the USB 2.0 drivers: ■ For Windows 2000, Windows Me, or Windows 98SE, see below. ■ For Windows XP, see page 6. ■ For Macintosh, see page 7. Note: Adaptec strongly recommends that you always use the most recent drivers to maximize your XHub's performance. Regularly check the Adaptec website at www.adaptec.com for the most up-to-date USB 2.0 drivers. Windows 2000/Me/98SE Turn on your computer and connect your AUH-4100 (see Plugging in Your XHub on page 4 for instructions). Insert the XHub for Notebooks CD into your CD-ROM drive. Windows loads the driver automatically. Double-checking Driver Installation To ensure that the driver has installed properly: 1 On your desktop, double-click My Computer. 2 Double-click Control Panel. 3 Double-click System. The System Properties window opens. 4 Open Device Manager. Adaptec USB 2.0 Hub should appear under Universal Serial Bus controllers. 5