Airlink AICAP650 User Manual - Page 32
Network Setting
View all Airlink AICAP650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
7.6.3 Network Setting The Network setting page provides five sub-menus: IP/Port Setting, Dynamic DNS Setting, UPnP Setting, Email Setting, and FTP Setting. IP/Port Setting This sub-menu allows you to configure the camera's IP address mode and assign its port number. DHCP: If your network uses a DHCP server, select this option. With this option, the camera will be assigned an IP address from the DHCP server automatically. However, please make sure that the DHCP server is set to assign a static IP address to the camera. Static IP: You can manually assign a static IP address to the camera. PPPoE: If your application requires a direct connection from a DSL modem through the camera's RJ-45 LAN port, select this option and enter the User ID and Password into the respective boxes. The camera will get an IP address from the ISP at start up. HTTP Port: Assign a port number for the camera. The default HTTP port is 80. Click Setup to save the settings. 32