Airlink AMPS240W Quick Installation Guide - Page 6
Configuring the Printer Server - setup
View all Airlink AMPS240W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Section 3 Configuring the Printer Server Note: The following steps only need to be performed one time from one computer. Step 1 Click the Discover button and your printer should show up under Server Name. If your print server does not show up, check all power and network cable connections to the printer. You may also need to disable any software firewalls you have on your computer. Step 2 Once the printer server appears in the Server Name box, click on it. You should see your printer next to Device name. Click on the Setup Wizard button.
Configuring the Printer Server
Note:
The following steps only need to be performed
one time
from one
computer.
Step 1
Click the
Discover
button and your printer should show up under
Server Name
.
If your print server does not show up, check all power and
network cable connections to the printer.
You may also need to disable any
software firewalls you have on your computer.
Step 2
Once the printer server appears in the
Server Name
box, click on it.
You should see your printer next to
Device name
.
Click on the
Setup Wizard
button.
Section 3